Date of Award

8-2026

Document Type

Thesis

Degree Name

Master of Science

Department

Electrical Engineering

Abstract

Orthogonal frequency division multiplexing (OFDM) was the physical layer waveform of fifth generation (5G) New Radio (NR), and field programmable gate arrays (FPGAs) were well suited to prototyping it because they were reconfigurable, highly parallel, and deterministic in real time. However, the path from a floating-point Simulink model to a verified fixed-point FPGA implementation was difficult and poorly documented, particularly for low-cost platforms. The purpose of this study was to design, implement, and hardware-verify a 5G NR-inspired OFDM transmitter baseband subsystem on the low-cost Intel DE10-Nano board and to document the complete workflow.

A behavioral MATLAB/Simulink model was converted to fixed point, translated to VHDL with MATLAB HDL Coder, compiled in Intel Quartus Prime, deployed to the Cyclone V FPGA, and verified at runtime with the Intel SignalTap Logic Analyzer. The transmitter implemented 16-point quadrature amplitude modulation (16-QAM) mapping through a two-dimensional lookup table, a first-in first-out (FIFO) streaming buffer, and a 64-point radix-2² streaming delay-feedback inverse fast Fourier transform (IFFT) with 118 cycles of latency, wrapped in an AXI4-Stream-compatible handshake interface.

With 4-bit symbol inputs and 8-bit data paths, the transmitter datapath required no DSP blocks, and the complete design, including its stimulus wrapper, used 1,095 of 41,910 adaptive logic modules (3%), 2,892 registers, and 78,144 block memory bits. Timing analysis reported a worst-case setup slack of +9.429 ns at 50 MHz. SignalTap captured live waveforms from 12 internal pipeline nodes, and all 12 verification criteria passed. A separate floating-point MATLAB model of the 16-QAM OFDM transmitter-receiver chain, evaluated over an additive white Gaussian noise channel, closely followed the theoretical bit error rate (BER) and recorded zero observed errors at signal-to-noise ratios of 22 dB and above.

The study contributed a hardware-verified VHDL implementation, a fixed-point strategy that eliminated DSP usage in the transmitter datapath, one of the few documented applications of SignalTap to an HDL Coder-generated 5G NR design, a practical HDL Coder-to-Quartus debugging methodology, and evidence that 5G NR physical layer prototyping was achievable on low-cost hardware. Cyclic prefix insertion was not implemented and was left for future work.

Index Terms—Cyclone V, DE10-Nano, field programmable gate array (FPGA), fifth generation (5G) New Radio (NR), fixed-point arithmetic, hardware description language (HDL) Coder, hardware verification, inverse fast Fourier transform (IFFT), orthogonal frequency division multiplexing (OFDM), quadrature amplitude modulation (QAM), SignalTap, Simulink.

Committee Chair/Advisor

Cajetan Akujuobi

Committee Member

Suxia Cui

Committee Member

Abood Samir

Publisher

Prairie View A&M University

Rights

© 2021 Prairie View A & M University

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Date of Digitization

11/18/2026

Contributing Institution

J B Coleman Library

City of Publication

Prairie View

MIME Type

Application/PDF


Share

COinS